| Customization: | Available |
|---|---|
| Product: | Pest Repeller |
| Pest Type: | Mole,Snake,Mouse,Rat |
|
Still deciding? Get samples of US$ 6.2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Description | Solar Energy Pest Repeller |
| Item No. | KDPT017 |
| Size | 36.7*14.3cm |
| Material: | Waterproof Plastic |
| Power Source: | Solar Energy |
| Applicable Area: | 6-8m |
| Packing: | 30pcs/ctn |
| Carton Size: | 49*32*38cm |
Solar Powered -Motion Activated Animal Repeller
This repelleris designed for permanent service allowing you to install it once and let it work!
It is weather-proof allowing it to work all year-round and in virtuallyall weather conditions .
It uses solar power to recharge the batteries so it isalways working.
The Passive Infrared sensor(PIR) detects motion andtriggers the ultrasonic speaker emitting a tone that people cannot hear butchases away common outdoor pests like dogs,cats,deer,raccoons,mice,skunks,squirrels and more.
This solar animal repeller is a safe andhumane way to keep unwanted animals away!
WARNING! Always check for underground utilities,cables orwires before digging or installing ! Failure to check could result inpersonal injury,property damage or even death.
Parts and Features:
To Assemble and lnstall:
1.Unpack the unit completely and confirm that parts are present,SEEFIGURES 1-3 above
2.Connect the repeller head,pole sections,connecting part and groundstake.SEE FIGURE1-3 above.
3.Turn power switch to "ON" position .SEE FIGURE2.
4.The PIR repeller is designed to be left ON continuously. It uses four2/3AA size NI-MH rechargeable batteries
5.Once turned ON,the red-LED light and ultrasonic signal will activate for 15seconds.Among the time ,there is sound waves for 2.5 seconds at the beginning.At the same time ,the white-LED lights flash blasting. Following this activation,
the unit will move to stand-by mode.
6.The unit is now ready for installation.The location should allow adequate sunlightTo keep the batteries fully charged.Be sure that the area needing protection iswithin the effective range of the repeller SEE FIGURE2.
7.For best results,keep the repeller head roughly9-10 inches above ground.
8.Take acre not to stress or break the repeller when installing in hardground.It is a good idea to prepare the ground for the ground stake toavoid damage to the unit.
9.When the PIR sensor detects motion,red-LED light will be lit up,The ultrasonic signal and the white-LED lights will run for 15 seconds .Following this,the Repeller will return to stand-by mode
10.When the device is working and the PIR sensor detects motion,theDevice will run for other 15 seconds in the next time.
Specifications:
1.Unit Dimensions: 5-1/2" W×3-1/2"D×14-1/3"h
2.Unit Weight: 8-1/2 ounces.
3.Power Supply: 4*2/3AA Ni-MH rechargeable batteries.
4.Power Consumption: working=15mA standby≤10uA
5.Ultrasonic Frequency: 25-61KHZ
6.Coverage Area: 30 feet@ 1100=2,425 square feet
CAUTION:
• Allow the Animal Repeller to operate continuously for best results.
• Do not immerse repeller in water.
• Do not cover-up the PIR sensor.
• To clean the repeller,use a damp-soft cloth and mild soap withWater.Do not use harsh chemicals or abrasive cleaning agentsThat may damage the repeller.
){kind=link}